TECO-Westinghouse CJM7/52

TECO Westinghouse · Optim JM
7 1/2HP 3600 213JM TEFC 230V|460V Pump
Catalog Number: CJM7/52
Alternative Number: AEEAJM 7.5-2-230/460-T, JMN7/52
HP
7 1/2
RPM
3600
Voltage
230V, 460V
Frame
213JM
Phase
3
Enclosure
TEFC
Material
Cast Iron
Mounting
C-Face / Rigid

Product-line overview

Introducing the TECO Westinghouse Optim JM Motor Line, purpose-built for optimal performance in pump applications. With a power range from 1 to 50 HP, this motor line is precisely engineered to meet the diverse demands of pumping systems across industrial settings. Featuring a Totally Enclosed IP54 design, these motors ensure robust protection against environmental elements, provideing longevity and reliability. The horizontal F1 mount enhances versatility, allowing for straightforward installation in various configurations. Operating at 60Hz with voltage options of 230V/460V or 575V, these motors seamlessly adapt to different electrical systems. Offering speeds of 3600, 1800, and 1200 RPM, the Optim JM Motor Line provides flexibility and precision, enabling optimal adaptation to specific pumping requirements. NEMA Premium Efficiency underscores the commitment to energy-conscious operation, making the TECO Westinghouse Optim JM Motor Line a trusted and high-performance choice for pump applications.

Design Features:

  • 1.15 Service Factor Sine Wave Power; 1.0 Service Factor VFD Power
  • 40˚C Ambient
  • Continuous Duty
  • Max Elevation 3300ft
  • Class F Insulation
  • NEMA Design B or C

Mechanical Features:

  • Shielded Bearings Frames 140JM (2, 4 & 6 Pole) - 280JM (4 & 6 Pole) and Open Bearings with Regreaseable Provisions Frames 280JM (2 Pole), 320JM
  • Polyrex EM Grease in all Regreaseable Bearings, Multemp SRL Grease in Shielded Bearings
  • Aluminum Rotor
  • Cast-Iron Frame and End Brackets
  • Cast-Iron Fan Cover and Terminal Box
  • Non-Sparking Plastic Fan
  • Number of Leads 230/460V: 9 Leads 1-5 HP; 12 Leads 7.5 and Larger; 575V: 3 Leads
  • Solderless Lug Terminals on All Leads
  • Grounding Terminal Inside Main Terminal Box
  • Interchangeable F1 and F2 mounting
  • Paint System: Phenolic Rust Proof Base with Lacquer Top Coat
  • Stainless Steel Nameplate
  • Rubber Flinger on DE Frames 140JM (2, 4 & 6 Pole) - 280JM (4 & 6 Pole); Steel Flinger on Both Ends 280JM (2 Pole), 320JM
  • Phenolic Alkyd Resin Varnish
  • *HPE™ High Pulse Endurance Spike Resistant Wire
  • JM Pump Shaft

Other Features:

  • CSA Certified for Class I, Division 2, Groups B, C & D (Class I, Zone 2, Groups IIB+H2, IIB and IIA)
  • Speed Ranges up to 10:1 CT, and 20:1 VT. Refer to data sheet for rating specific turn down ratios
  • Meets NEMA MG1 Part 31.4.4.2

Precautions should be taken to eliminate or reduce voltage spikes and shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG1, Part 31.4.4.

CAD$1,099.36
Ships next business day

Available for Delivery

To get accurate delivery estimates, please enter your postal code.

Stock Locations

Edmonton [eMotors #2], AB: In Stock (1)
Edmonton, AB: In Stock

Technical Support Available 8:30am-6:00pm EST

Call 1-800-890-7593

TECO Westinghouse: Optim JM (62)

CJM0014511800575V143JM $503.96
CJM0012513600575V143JM $503.96
CJM1/5451 1/21800575V145JM $569.56
CJM1/5251 1/23600575V143JM $570.56
CJM0024521800575V145JM $609.32
CJM0022523600575V145JM $614.29
CJM0016511200575V145JM $625.23
CJM1/5651 1/21200575V182JM $682.88
CJM0034531800575V182JM $686.85
CJM0032533600575V182JM $692.82
CJM0026521200575V184JM $770.35
CJM0054551800575V184JM $774.33
CJM005451800230V, 460V184JM $774.33
CJM0052553600575V184JM $823.03
CJM005253600230V, 460V184JM $823.03
CJM0036531200575V213JM $1,081.47
CJM7/5257 1/23600575V213JM $1,099.36
CJM7/527 1/23600230V, 460V213JM $1,099.36
CJM7/5457 1/21800575V213JM $1,123.22
CJM7/547 1/21800230V, 460V213JM $1,123.22
CJM01025103600575V215JM $1,317.05
CJM0102103600230V, 460V215JM $1,317.05
CJM0056551200575V215JM $1,331.96
CJM005651200230V, 460V215JM $1,331.96
CJM01045101800575V215JM $1,366.75
CJM0104101800230V, 460V215JM $1,366.75
CJM01545151800575V254JM $1,768.33
CJM0154151800230V, 460V254JM $1,768.33
CJM01525153600575V254JM $1,802.12
CJM0152153600230V, 460V254JM $1,802.12
CJM7/5657 1/21200575V254JM $1,869.71
CJM7/567 1/21200230V, 460V254JM $1,869.71
CJM01065101200575V256JM $2,291.17
CJM0106101200230V, 460V256JM $2,291.17
CJM02045201800575V256JM $2,295.15
CJM0204201800230V, 460V256JM $2,295.15
CJM02025203600575V256JM $2,306.08
CJM0202203600230V, 460V256JM $2,306.08
CJM02545251800575V284JM $2,872.66
CJM0254251800230V, 460V284JM $2,872.66
CJM02525253600575V284JM $2,906.46
CJM0252253600230V, 460V284JM $2,906.46
CJM01565151200575V284JM $2,983.99
CJM0156151200230V, 460V284JM $2,983.99
CJM03045301800575V286JM $3,381.59
CJM03025303600575V286JM $3,381.59
CJM0304301800230V, 460V286JM $3,381.59
CJM0302303600230V, 460V286JM $3,381.59
CJM02065201200575V286JM $3,734.46
CJM0206201200230V, 460V286JM $3,734.46

Description

The OPTIM JM is designed for commercial and industrial closed coupled pump applications. Couple your OPTIM JM with our TECO VFD’s for energy savings & speed control.

Feature

  • Available from 1-50 HP; 2, 4 & 6 Pole
  • Rugged Cast-iron Construction on Frame, End Brackets, and Conduit Box
  • Inverter Duty Speed Range Includes: 10:1 CT and 20:1 VT
  • CSA Certified for Inverter Duty Operation in a Class I, Division II, Groups B, C and D

OEM Replacement Pump Motor

Many pumps come with a motor pre-installed, so where do you find a replacement when the motor fails? It’s possible to contact the pump OEM and order a replacement, however, you’ll likely find a lower-cost, faster-shipping alternative online, without sacrificing quality. The potential cost savings come from decreasing the number of businesses involved in the motor supply chain and ordering directly from the manufacturer of the motor.

Because of standardized frame sizes, you’ll be able to find a replacement that exactly matches the OEM pump motor specifications. Confirm the below information on the motor nameplate to find a replacement:

  • Horsepower
  • RPM
  • Voltage
  • Frame Size
  • Enclosure
  • Phases
  • Mounting Type

Enter your product specifications on the left side menu on this page to filter your options. This will bring back several options to choose from, with varying prices and lead times.

If you’re unfamiliar with these product specs or need a second set of eyes, contact our expert team for support. We’re available Monday-Friday, 7am-6pm MT by phone or email.

Motors are distributed from Edmonton, Alberta; Toronto, Ontario; and Montreal, Quebec. Most pump motors will arrive within 1-5 business days to postal codes in Canada.

Jet Pump Motors

Similar to a jet engine, jet pump motors create large amounts of pressure. This is where the jet pump motor got its name. The pump generates suction to draw fluid into a chamber. A nozzle transforms the pressure into a high-pressure jet, allowing for efficient movement of fluid. These are different than submersible pumps, as the motor and pump are located at the surface, not submersed in fluid.

When searching for a replacement jet pump motor, confirm if your motor is a deep well or shallow well pump. The deep well pump can transport water from depths up to 200 feet. Whereas shallow well pump motors can transport from depths of up to 25 feet.

Keep in mind, a jet motor should never run dry as it could permanently damage the pump.

These are often used in residential pool pumps, industrial pumps, transfer and circulating pumps, and commercial machinery. Baldor, Century, Nidec (also known as US Motors or Emerson Motors), and Marathon manufacturer trusted jet pump motors used across Canada.

P Base / Vertical Motors

Different manufacturers use different nomenclature, but generally a P base motor will indicate a vertical mount pump motor. Because they are vertical, they’re designed to take high axial load but lower radial load. These are commonly used in irrigation pumps and water treatment. WEG offers a wide selection of vertical pump motors, ranging from 1 – 150 horsepower. Baldor vertical pump motors come in 3 –75 horsepower, but custom orders can be built over 2000 horsepower.

Nidec (US Motors) has the largest selection of any brand with both hollow & sold shaft, Medium & high thrust bearings, their range goes from 5 HP – 2000 HP.

Hydraulic Pump Motors

WEG’s hydraulic pump motors come in 5 horsepower, 7.5 horsepower, and 10 horsepower. These motors work with pumps to convert electrical energy into fluid pressure. These are often used for lifting loads in construction, excavating, and manufacturing applications.

Submersible Pump Motors

Baldor’s submersible pump motors are frequently used in wastewater facilities and are built to be completely submerse in liquid. They use the surrounding effluent to cool the motor. They also offer an immersible line of motors, which are designed with a unique seal system. While these motors are not meant to be continually submersed, they are ideal for applications where flooding could occur.

Close Coupled Pump Motors

What is a close coupled motor? The motor shaft and pump are rigidly connecting in a case. The casing is connected directly to the motor. Vs a frame mounted motor where the motor and pump are mounted on a common base plate, which are most common in higher horsepower applications. The close-coupled option is easier to install because the shaft and casing do not need to be aligned. Its design is compact, making it ideal for a confined plant room. Because an additional coupling does not need to be purchased, this is a lower cost option. However, there is a higher risk of motor damage if the pump seal fails. These pump motors are commonly used in transporting water and hazardous chemicals.

Close coupled pump motors may be categorized as JP or JM. The ‘J’ indicates close coupled and the second letter indicates the type of seal. A JP seal is a packing seal and a JM seal is a mechanical seal. These are not interchangeable so ensure you’ve confirmed which type of seal you need for your pump.

We distribute reputable motor brands including Baldor, Century, Marathon, and WEG, which are all stocked in Canada.

Electrical Data
Rated Motor Output Power
7 1/2 HP
5.6 kW
Rated Motor Speed
3600 RPM
Rated Motor Voltage
230V, 460V
Rated Motor Current
17.3/8.7 AMP
Phase
3
Poles
2
Locked Rotor Current
128.00/64.00 AMP
Fl Current @ 208V
19.2 AMP
Service Factor
1.15
KVA Code
H
Nominal Efficiency
91
Nominal Power Factor
89
Leads (Qty, Size)
1
Frequency
60 Hz
Connection
Delta
Start Capacitor
-
Run Capacitor
-
MFD
-
VFD (S.F. 1.0)
Ratio
Hz
Variable Torque
20:1
3
Constant Torque
10:1
6
General Data
Frame
213JM
Enclosure
TEFC
Mounting
C-Face / Rigid
Number of Speeds
1 Speed
Approximate Weight
167lb
Double Drilled
No
Frame Material
Cast Iron
C-Dimension
-
NEMA Design
B
Degree of Protection (IP)
IP54
Insulation Class
F
Rotation
Reversible
Duty
Continuous
Conduit Box Location
F1
Removable Feet
No
Orientation
Horizontal
Ambient Temp
-40 to 40 °C
Full Load Temperature Rise
Full Load Temp Rise
-
Temp Code
T3C
Mechanical Data
DE Bearing
6309ZZ
NDE Bearing
6306ZZ
Shaft Diameter
1.00" (0.875")
Shaft Length
4.25"
Grease Type
Multemp SRL
Greaseable
No
Hazardous Locations
CSA Certified
Class I, Div 2, Groups B, C & D
Temp Code (Sine Wave Power)
T3B
Temp Code (VFD Power)
T3C
Additional Information
Agency Approvals
CSA & UL
Country of Origin
TAIWAN
Warranty
3-Year

Customer Reviews

Reviews for this product are shared amongst other products of the same productline as they are the same product but vary by specifications (like HP or RPM).

5 stars
0
4 stars
0
3 stars
0
2 stars
0
1 star
0

There are no reviews for this product yet.

Be the first to write a review

About TECO Westinghouse

George Westinghouse introduced his DC Motor line in 1888, marking the beginnings of the TECO-Westinghouse brand. Now with flagship products like the TECO L510 VFD, which is known for its reliability and user-friendly interface, the company is a market leader in electric motor and control in Canada. TECO-Westinghouse’s manufacturing facilities are in Taiwan, China, and Malaysia, and their Canadian headquarters are in Edmonton, Alberta.

TECO-Westinghouse’s extensive network of manufacturing bases is located across the globe, although the company is known as TECO Group or Westinghouse Group outside of North America. They offer product innovation opportunities, fantastic engineering & manufacturing resources, and unmatched service.

TECO-Westinghouse has always put quality first—it's products exceed international industrial standards. With over 100 years under their belt and products that span a range of applications, TECO-Westinghouse is your preferred source of electric motors, controls, and accessories.

Shop TECO Westinghouse