WEG JM050502NPW22

WEG · W22 NEMA Premium JM & JP Pump
50 HP 3600 326JM TEFC 575V Pump Motors
Catalog Number: JM050502NPW22
Spec Number: 12141664
HP
50
RPM
3600
Voltage
575V
Frame
326JM
Phase
3
Enclosure
TEFC
Material
Cast Iron
Mounting
C-Face / Rigid
CAD$7,400.20
Ships next business day

Available for Delivery

To get accurate delivery estimates, please enter your postal code.

Stock Locations

Pointe-Claire, QC: Out of Stock
North York, ON: In Stock
Edmonton, AB: Out of Stock

Technical Support Available 8:30am-6:00pm EST

Call 1-800-890-7593

Contact our team for alternative solutions

No cross-referenced matches have been found, but our team may be able to help find an alternate solution.

WEG: W22 NEMA Premium JM & JP Pump (176)

JP000504NPW2211770575V143JP $680.35
JP000502NPW2213480575V143JP $708.25
JP001504NPW221 1/21760575V145JP $736.14
JP001502NPW221 1/23455575V145JP $736.14
JP000506NPW2211150575V145JP $761.61
JP002504NPW2221755575V145JP $770.10
JP002502NPW2223450575V145JP $770.10
JP003502NPW22145JP33450575V145JP $924.12
JP003504NPW2231760575V182JP, 184JP $992.03
JP003502NPW2233500575V182JP, 184JP $1,061.16
JP001506NPW221 1/21160575V182JP $1,073.28
JP005502NPW2253490575V182JP, 184JP $1,097.54
JP005504NPW2251750575V184JP $1,156.96
JP002506NPW2221160575V184JP $1,279.45
JP007504NPW227 1/21755575V213JP $1,450.45
JP007502NPW22184JP7 1/23470575V184JP $1,495.32
JP003506NPW2231170575V213JP $1,563.23
JP010504NPW22101755575V215JP $1,700.28
JP007502NPW227 1/23510575V213JP $1,700.28
JP010502NPW22103510575V215JP $1,786.38
JP005506NPW2251165575V215JP $1,893.10
JP015502NPW22215JP153490575V215JP $2,498.27
JP015504NPW22151765575V254JP $2,609.84
JP007506NPW227 1/21175575V254JP $2,739.60
JP015502NPW22153520575V254JP $2,977.30
JP020504NPW22201760575V256JP $3,101.00
JP010506NPW22101170575V256JP $3,114.34
JP020502NPW22203520575V256JP $3,402.98
JP025504NPW22251760575V284JP $3,789.84
JP025502NPW22256JP253530575V256JP $3,954.78
JP030504NPW22301760575V286JP $4,211.88
JP025502NPW22253530575V256JP $4,391.37
JP030502NPW22303530575V286JP $4,673.94
JP015506NPW22151175575V284JP $4,710.32
JP040504NPW22401770575V324JP $5,873.35
JP040502NPW22286JP403550575V284JP $5,909.73
JM050504NPW22501775575V326JM $6,409.38
JP050504NPW22501770575V326JP $6,536.72
JP040502NPW22403550575V324JP $6,645.87
JP050502NPW22503555575V326JP $7,548.16
JM060502NPW22326JM603550575V326JM $8,169.08
JP060502NPW22326JP603550575V326JP $8,332.81
JM060504NPW22601770575V364JM $9,987.00
JP060504NPW22601770575V364JP $10,185.89
JM075504NPW22751770575V365JM $11,340.43
JP075504NPW22751770575V365JP $11,567.21
JM060502NPW22603550575V364JM $11,603.59
JP060502NPW22603550575V364JP $11,836.44
JM075502NPW22753550575V365JM $12,394.31
JP075502NPW22753550575V365JP $12,642.92

Description

Especially developed for applications on pumps with direct coupling, the W22 JM/JP (mechanical seal/gasket) motors feature frame with hermetic enclosure that allow the motor to operate in humid or dusty environments in industrial or commercial applications. They complie with NEMA Premium efficiency level.

Feature

  • Motors are compliant with DOE and NRCAN
  • Three-phase, 2, 4 and 6 pole, 60Hz, Service Factor 1.25
  • Voltage: 230/460V, 575V
  • Totally Enclosed Fan Cooled - TEFC (IP55) waterproof as per NEMA MG1 1.26.6 “Waterproof Machine”
  • Die cast aluminum squirrel cage rotor
  • V’Ring sealing
  • Ball bearings
  • 1045 heat treated and stress relieved carbon steel shaft
  • Class “F” insulation for all frames. Temperature rise limited to Class “B” (80K)
  • 575V rated motors have Spike Resistant WISE wire.
    • Protects against IGBT voltage spikes up to 2400V.
    • Exceeds NEMA MG1 Part 31.4.4.2
  • Insulation System:
    • Dip and Bake Insulation system with class “H” resin up to frame 324/6JM(JP)
  • NEMA design “B”
  • Continuous duty (S1)
  • 104ºF (40ºC) ambient temperature
  • Altitude: 3300 ft (1000m)
  • Double Gasketed terminal box
  • Paint: Synthetic enamel alkyd resin base
  • Paint Plan: 203A - 254/6JM(JP) to 364/5JM(JP)
  • Color: RAL 5009 - Blue
  • Fitted with closed rubber drain breathers
  • Regreaseable bearings for frames 254/6JM(JP) and up

OEM Replacement Pump Motor

Many pumps come with a motor pre-installed, so where do you find a replacement when the motor fails? It’s possible to contact the pump OEM and order a replacement, however, you’ll likely find a lower-cost, faster-shipping alternative online, without sacrificing quality. The potential cost savings come from decreasing the number of businesses involved in the motor supply chain and ordering directly from the manufacturer of the motor.

Because of standardized frame sizes, you’ll be able to find a replacement that exactly matches the OEM pump motor specifications. Confirm the below information on the motor nameplate to find a replacement:

  • Horsepower
  • RPM
  • Voltage
  • Frame Size
  • Enclosure
  • Phases
  • Mounting Type

Enter your product specifications on the left side menu on this page to filter your options. This will bring back several options to choose from, with varying prices and lead times.

If you’re unfamiliar with these product specs or need a second set of eyes, contact our expert team for support. We’re available Monday-Friday, 7am-6pm MT by phone or email.

Motors are distributed from Edmonton, Alberta; Toronto, Ontario; and Montreal, Quebec. Most pump motors will arrive within 1-5 business days to postal codes in Canada.

Jet Pump Motors

Similar to a jet engine, jet pump motors create large amounts of pressure. This is where the jet pump motor got its name. The pump generates suction to draw fluid into a chamber. A nozzle transforms the pressure into a high-pressure jet, allowing for efficient movement of fluid. These are different than submersible pumps, as the motor and pump are located at the surface, not submersed in fluid.

When searching for a replacement jet pump motor, confirm if your motor is a deep well or shallow well pump. The deep well pump can transport water from depths up to 200 feet. Whereas shallow well pump motors can transport from depths of up to 25 feet.

Keep in mind, a jet motor should never run dry as it could permanently damage the pump.

These are often used in residential pool pumps, industrial pumps, transfer and circulating pumps, and commercial machinery. Baldor, Century, Nidec (also known as US Motors or Emerson Motors), and Marathon manufacturer trusted jet pump motors used across Canada.

P Base / Vertical Motors

Different manufacturers use different nomenclature, but generally a P base motor will indicate a vertical mount pump motor. Because they are vertical, they’re designed to take high axial load but lower radial load. These are commonly used in irrigation pumps and water treatment. WEG offers a wide selection of vertical pump motors, ranging from 1 – 150 horsepower. Baldor vertical pump motors come in 3 –75 horsepower, but custom orders can be built over 2000 horsepower.

Nidec (US Motors) has the largest selection of any brand with both hollow & sold shaft, Medium & high thrust bearings, their range goes from 5 HP – 2000 HP.

Hydraulic Pump Motors

WEG’s hydraulic pump motors come in 5 horsepower, 7.5 horsepower, and 10 horsepower. These motors work with pumps to convert electrical energy into fluid pressure. These are often used for lifting loads in construction, excavating, and manufacturing applications.

Submersible Pump Motors

Baldor’s submersible pump motors are frequently used in wastewater facilities and are built to be completely submerse in liquid. They use the surrounding effluent to cool the motor. They also offer an immersible line of motors, which are designed with a unique seal system. While these motors are not meant to be continually submersed, they are ideal for applications where flooding could occur.

Close Coupled Pump Motors

What is a close coupled motor? The motor shaft and pump are rigidly connecting in a case. The casing is connected directly to the motor. Vs a frame mounted motor where the motor and pump are mounted on a common base plate, which are most common in higher horsepower applications. The close-coupled option is easier to install because the shaft and casing do not need to be aligned. Its design is compact, making it ideal for a confined plant room. Because an additional coupling does not need to be purchased, this is a lower cost option. However, there is a higher risk of motor damage if the pump seal fails. These pump motors are commonly used in transporting water and hazardous chemicals.

Close coupled pump motors may be categorized as JP or JM. The ‘J’ indicates close coupled and the second letter indicates the type of seal. A JP seal is a packing seal and a JM seal is a mechanical seal. These are not interchangeable so ensure you’ve confirmed which type of seal you need for your pump.

We distribute reputable motor brands including Baldor, Century, Marathon, and WEG, which are all stocked in Canada.

Electrical Data
Rated Motor Output Power
50 HP
37 kW
Rated Motor Speed
3550 RPM
Rated Motor Voltage
575V
Rated Motor Current
44.9 AMP
Phase
3
Poles
2
Locked Rotor Current
-
Fl Current @ 208V
-
Service Factor
1.25
KVA Code
-
Nominal Efficiency
93
Nominal Power Factor
89
Leads (Qty, Size)
-
Frequency
60 Hz
Connection
-
Start Capacitor
-
Run Capacitor
-
MFD
-
VFD (S.F. 1.0)
Ratio
Hz
Variable Torque
1000:1
0.06
Constant Torque
20:1
3
General Data
Frame
326JM
Enclosure
TEFC
Mounting
C-Face / Rigid
Number of Speeds
-
Approximate Weight
587lb
Double Drilled
Yes
Frame Material
Cast Iron
C-Dimension
29.645"
NEMA Design
B
Degree of Protection (IP)
IP55
Insulation Class
F
Rotation
Reversible
Duty
Continuous
Conduit Box Location
-
Removable Feet
No
Orientation
Horizontal
Ambient Temp
40°C
Full Load Temperature Rise
Full Load Temp Rise
80K
Temp Code
-
Mechanical Data
DE Bearing
6312-ZZ
NDE Bearing
6212-ZZ
Shaft Diameter
1.25"
Shaft Length
5.25"
Grease Type
Polyrex EM
Greaseable
Yes
Hazardous Locations
CSA Certified
-
Temp Code (Sine Wave Power)
-
Temp Code (VFD Power)
-
Additional Information
Agency Approvals
CSA
Country of Origin
BRAZIL
Warranty
2-Year

Customer Reviews

Reviews for this product are shared amongst other products of the same productline as they are the same product but vary by specifications (like HP or RPM).

5 stars
0
4 stars
0
3 stars
0
2 stars
0
1 star
0

There are no reviews for this product yet.

Be the first to write a review

About WEG

With flagship product lines, such as the WEG Pump Motor line, WEG motors are trusted in the waste and water treatment, mining, chemical processing, oil & gas, and manufacturing industries.

Headquartered in Toronto, Ontario, WEG Motors Canada (VJ Pamensky) distributes efficient technology that drives sustainable growth for your business. They serve industries such as oil and gas, pulp and paper, power generation, food and beverage, and more.

WEG demonstrates that hard work and passion really do make dreams come true. Werner Ricardo Voigt, Eggon João da Silva and Geraldo Werninghaus joined forces in 1961 and founded Eletromotores Jaraguá. Eventually changing its name to honour the three founders, WEG has now become one of the world’s largest manufacturers of electric motors and controls. Operating out of Duluth, Georgia, WEG motors now has seven distribution centres throughout Canada and the United States.

WEG’s commitment to growth, innovation, and teamwork has been the driving factor behind their forward movement. Now producing over 21 million individual items annually, WEG motors attributes this success to their state-of-the-art facilities and cutting-edge processes. They will always strive to develop and improve on their industrial electrical solutions.

Shop WEG