TECO-Westinghouse APH04045D-841

Product-line overview

The TECO Westinghouse Advantage Plus IEEE 841 Motors stand as a pinnacle of reliability and performance, adeptly designed for a diverse array of industrial applications. Ideal for deployment in fans & blowers, compressors, conveyors, pumps, mixers, crushers, as well as severe duty, petro-chemical, and pulp & paper applications, these motors offer a robust solution for demanding operational environments.

Product Overview:

Covering a substantial power range from 1 to 500 HP, these motors are engineered for optimal performance. Featuring a horizontal F1 mount and offering flexible speed options at 3600, 1800, 1200, and 900 RPM, they seamlessly integrate into various industrial setups. Operating at 60Hz with voltage options of 460V or 575V, these motors adhere to NEMA Premium Efficiency standards. Encased in a Totally Enclosed Fan Cooled IP56 Design, they ensure durability and protection in challenging conditions.

Design Features:

• 1.15 Service Factor Sine Wave Power; 1.0 Service Factor VFD Power
• NEMA Design B or C
• Max Elevation: 3300ft
• Continuous Duty
• Class F Insulation
• Ambient Temperature: 40˚C

Mechanical Features:

• C3 Clearance Open Bearings with Regreaseable Provisions
• Polyrex EM Grease
• Aluminum Rotor up to 5000 Frames; Copper/Copper Alloy 5800 and Larger
• Routine Test Report Shipped with Motor
• Cast-Iron Frame and End Brackets
• Cast-Iron Conduit Box up to 449T Frames; Fabricated Steel Conduit Box 5000 Frames and Larger
• Non-Sparking Plastic Fan up to 449T 4,6 & 8 Pole Motors; Bronze Fan 440TS 2 Pole Motors and 5000 Frames and Larger
• Number of Leads 460V/575V: 3 Leads; Solderless Lug Terminals on All Leads
• Grounding Terminal Inside Main Terminal Box and Provisions for Grounding Terminal on Motor Frame
• Interchangeable F1 and F2 mounting up to 449T
• Dual Drilled Feet for Longer Frames (i.e. 145T also Drilled for 143T) 449T and Below
• Paint System: Zinc Chromate Epoxy Primer, Phenolic Rust Proof Base with Lacquer Top Coat
• Stainless Steel Hardware, Breather Drains and Nameplate
• Inpro/Seal on DE and NDE
• HPE™ High Pulse Endurance Spike Resistant Wire
• 2 Dips Phenolic Alkyd Resin Varnish with Moisture Resistant Varnish
• Bi-Directional Rotation Except 3600RPM Motors 5000 Frames and Larger; and 300 HP 3600RPM, Which are CCW From NDE
• Winding RTD's, Space Heaters and Provisions for Bearing RTD's Standard 5000 Frames and Larger

Other Features:

• CSA Certified for Class I, Division 2, Groups B, C & D (Class I, Zone 2, Groups IIB+H2, IIB and IIA)
• CSA Certified Class II, Division 2 (Class II, Zone 22) available for 440 Frames and larger upon request
• Speed Ranges up to 10:1 CT, and 20:1 VT. Refer to Data Sheet for Rating Specific Turn Down Ratios. Precautions should be taken to eliminate or reduce voltage spikes and shaft currents imposed by the VFD, as stated per NEMA MG1, Part 31.4.4.
• Meets or Exceeds NEMA MG1 Part 31.4.4.2; IEEE 45 Marine Duty 1 – 125HP; IEEE Std 841™-2009

These motors provide a comprehensive solution, combining robust design, efficiency, and compliance with industry standards, making them a reliable choice for a wide range of industrial applications.