TECO-Westinghouse APH05045

Product-line overview

The Advantage Plus IEEE Ready TECO Westinghouse motor stands as an exemplary solution designed to meet the demands of a diverse range of industrial applications. Engineered for reliability and efficiency, this motor is well-suited for deployment in fans & blowers, compressors, severe duty, petro-chemical, and pulp & paper applications, as well as pumps, mixers, crushers, and conveyors.

With a power range spanning from 1 to 100 HP and flexible speed options at 3600, 1800, 1200, and 900 RPM, it provides versatility to accommodate various operational requirements. The motor features a horizontal F1 mount and operates at 60Hz, with voltage options of 460V or 575V, offering seamless integration into diverse industrial setups. Its robust construction is encapsulated in a Totally Enclosed IP55 Design, emphasizing durability and protection, while also adhering to NEMA Premium Efficiency standards, highlighting its commitment to optimal performance and energy efficiency.

Design Features:

• 1.15 Service Factor Sine Wave Power; 1.0 Service Factor VFD Power
• 40˚C Ambient
• Continuous Duty
• Max Elevation 3300ft
• Class F Insulation
• NEMA Design B or C

Mechanical Features:

• C3 Clearance Open Bearings with Regreaseable Provisions
• Polyrex EM Grease
• Aluminum Rotor
• Cast-Iron Frame and End Brackets
• Cast-Iron Conduit Box
• Non-Sparking Plastic Fan
• Number of Leads 460V/575V: 3 Leads; Solderless Lug Terminals on All Leads
• Grounding Terminal Inside Main Terminal Box and Provisions for Grounding Terminal on Motor Frame
• Interchangeable F1 and F2 mounting
• Dual Drilled Feet for Longer Frames (i.e. 145T also Drilled for 143T)
• Paint System: Zinc Chromate Epoxy Primer, Phenolic Rust Proof Base with Lacquer Top Coat
• Stainless Steel Hardware, Breather Drains and Nameplate
• Rubber Flinger on DE up to 280T; Copper Flinger on Both Ends 280TS and Larger
• HPE™ High Pulse Endurance Spike Resistant Wire. * Precautions should be taken to eliminate or reduce voltage spikes and shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG1, Part 31.4.4.
• 2 Dips Phenolic Alkyd Resin Varnish with Moisture Resistant Varnish
• Bi-Directional Rotation

Other Features:

• CSA Certified for Class I, Division 2, Groups B, C & D (Class I, Zone 2, Groups IIB+H2, IIB and IIA)
• CSA Certified for Class II, Division 2, Groups F & G (Zone 22, Groups IIIA & IIIB)
• Speed Ranges up to 10:1 CT, and 20:1 VT. Refer to data sheet for rating specific turn down ratios
• Meets NEMA MG1 Part 31.4.4.2
• Precautions should be taken to eliminate or reduce voltage spikes and shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG1, Part 31.4.4